Pipe Support Systems
Standon Model S89 Flanged Adjustable Pipe Support
The Standon model #S89 flanged pipe support is ideal for use on backflow devices and large water meters. It is perfect for retrofitting existing installations and replacing ill fitting concrete blocks & etc., with adjustable, quality pipe supports.
- Bolts directly to the flange.
- Accepts standard IPS pipe – No threading required.
- Comes complete with anchorable base plate.
- Laser cut steel for guaranteed fit every time.
- Available in sizes 2″ through 48″ – Class 125 flanges.
- Also available in 100% 304 Stainless Steel
| MATERIAL | |
|---|---|
| Flange Plate: | ASTM A36 |
| Collar/ Base Cups: | ASTM A53 D.O.M. tubing |
| Threaded Stud: | ASTM A36; rolled thread Grade ASTM A307 |
| Base Plate: | ASTM A36 Sheet Steel – .25″ plate |
| Optional Material: | 100% 304 Stainless Steel |
| FABRICATION | |
| All welds: | 100% MIG welding, electrode E70XX |
| Plates: | Laser cut, programmed dimensions, radiused corners |
| FINISH | |
| All pipe supports have a corrosion resistant, electro galvanized finish. Optional finshes available as required. | |
DIMENSIONS
| SUPPORT SIZE | HOLE RADIUS | FLANGE PLATE | THREAD STUD | BASE PLATE | EXTENSION PIPE REQ’D | MINIMUM DIST. TO FLOOR |
|---|---|---|---|---|---|---|
| 2″ | 2.375″ | .250″ | 1″ x 6″ | 4″x6″x¼” | 2″ SCH. 40 | 7″ |
| 2½” | 2.75″ | .250″ | 1″ x 6″ | 4″x6″x¼” | 2″ SCH. 40 | 7″ |
| 3″ | 3.00″ | .250″ | 1″ x 6″ | 4″x6″x¼” | 2″ SCH. 40 | 7″ |
| 4″ | 3.75″ | .250″ | 1″ x 6″ | 4″x6″x¼” | 2″ SCH. 40 | 7″ |
| 6″ | 4.75″ | .250″ | 1″ x 6″ | 4″x6″x¼” | 2″ SCH. 40 | 7″ |
| 8″ | 5.87″ | .250″ | 1″ x 6″ | 4″x6″x¼” | 2″ SCH. 40 | 7″ |
| 10″ | 7.125″ | .250″ | 1″ x 6″ | 4″x6″x¼” | 2″ SCH. 40 | 7″ |
| 12″ | 8.50″ | .250″ | 1″ x 6″ | 4″x6″x¼” | 2″ SCH. 40 | 7″ |
| 14″ | 9.375″ | .375″ | 1½” x 6″ | 8″x8″x½” | 3″ SCH. 40 | 7″ |
| 16″ | 9.625″ | .375″ | 1½” x 6″ | 8″x8″x½” | 3″ SCH. 40 | 7″ |
| 18″ | 11.375″ | .375″ | 2″ x 6″ | 8″x8″x½” | 4″ SCH. 40 | 10″ |
| 20″ | 12.50″ | .375″ | 2″ x 6″ | 8″x8″x½” | 4″ SCH. 40 | 10″ |
| 24″ | 14.75″ | .375″ | 2″ x 6″ | 8″x8″x½” | 4″ SCH. 40 | 10″ |
Standon Model S92 Adjustable Pipe Saddle Support
The “Standon” model #S92 pipe support is specifically designed to fit ductile iron pipe. A nearly 50% circumferential cradle, and a pipe to saddle gap of less than .125″ guarantees excellent performance. A neoprene liner is available for IPS size pipe for a perfect fit.
- Accepts standard IPS pipe – No threading required.
- Comes complete with over-sized anchorable base plate.
- Available in sizes 2″ through 36″.
- Also available in 100% 304 Stainless Steel.
| MATERIAL | |
|---|---|
| Saddle Strap: | ASTM A36 |
| Collar/ Base Cups: | ASTM A53 D.O.M. tubing |
| Threaded Stud: | ASTM A36; rolled thread Grade ASTM A307 |
| Base Plate: | ASTM A36 Sheet Steel – .25″ plate |
| Optional Material: | 100% 304 Stainless Steel |
| FABRICATION | |
| All welds: | 100% MIG welding, electrode E70XX |
| Saddles: | Formed to ductile iron radius. |
| FINISH | |
| All pipe supports have a corrosion resistant, galvanized finish. | |
DIMENSIONS
| SUPPORT SIZE | PIPE O.D. | STRAP SIZE | THREAD STUD | BASE PLATE | EXTENSION PIPE REQ’D | MINIMUM DIST. TO FLOOR |
|---|---|---|---|---|---|---|
| 2″ | 2.5″ | 3/8″ x 2″ | 1″ x 6″ | 4″x6″x¼” | 2″ SCH. 40 | 7″ |
| 2½” | 3″ | 3/8″ x 2″ | 1″ x 6″ | 4″x6″x¼” | 2″ SCH. 40 | 7″ |
| 3″ | 3.96″ | 3/8″ x 2″ | 1″ x 6″ | 4″x6″x¼” | 2″ SCH. 40 | 7″ |
| 4″ | 4.80″ | ½” x 2″ | 1″ x 6″ | 8″x8″x¼” | 2″ SCH. 40 | 7″ |
| 6″ | 6.90″ | ½” x 2″ | 1″ x 6″ | 8″x8″x¼” | 2″ SCH. 40 | 7″ |
| 8″ | 9.05″ | ½” x 2″ | 1″ x 6″ | 8″x8″x¼” | 2″ SCH. 40 | 7″ |
| 10″ | 11.10″ | ½” x 2″ | 1″ x 6″ | 8″x8″x¼” | 2″ SCH. 40 | 7″ |
| 12″ | 13.20″ | ½” x 2″ | 1″ x 6″ | 8″x8″x¼” | 2″ SCH. 40 | 7″ |
| 14″ | 15.30″ | 5/8″ x 3″ | 1½” x 6″ | 8″x8″x½” | 3″ SCH. 40 | 9½” |
| 16″ | 17.40″ | 5/8″ x 3″ | 1½” x 6″ | 8″x8″x½” | 3″ SCH. 40 | 9½” |
| 18″ | 19.50″ | ¾” x 4″ | 2″ x 6″ | 8″x8″x½” | 4″ SCH. 40 | 10″ |
| 20″ | 21.60″ | ¾” x 4″ | 2″ x 6″ | 8″x8″x½” | 4″ SCH. 40 | 10″ |
| 24″ | 25.80″ | ¾” x 4″ | 2″ x 6″ | 8″x8″x½” | 4″ SCH. 40 | 10″ |
| 30″ | 32.00″ | 1″ x 5″ | 3″ x 6″ | 15″x15″x½” | 6″ DIP | 10″ |
| 36″ | 38.30″ | 1″ x 5″ | 3″ x 6″ | 15″x15″x½” | 6″ DIP | 10″ |
Standon Model C92 Adjustable Pipe Saddle Clamp Support
The “Standon” model #C92 saddle clamp support is a two piece, full circle clamp specifically designed to fit ductile iron pipe. It comes supplied with two bolts and nuts to retain the matching top saddle. The C92 is perfect for installations where seizmic activitiy may be present. A neoprene liner is available for IPS size pipe for a perfect fit.
- Accepts standard IPS pipe – No threading required.
- Comes complete with over-sized anchorable base plate.
- Available in sizes 2″ through 36″.
- Also available in 100% 304 Stainless Steel.
| MATERIAL | |
|---|---|
| Saddle Strap: | ASTM A36 |
| Collar/ Base Cups: | ASTM A53 D.O.M. tubing |
| Threaded Stud: | ASTM A36; rolled thread Grade ASTM A307 |
| Base Plate: | ASTM A36 Sheet Steel – .25″ plate |
| Optional Material: | 100% 304 Stainless Steel |
| FABRICATION | |
| All welds: | 100% MIG welding, electrode E70XX |
| Saddles: | Formed to ductile iron radius. |
| FINISH | |
| All pipe supports have a corrosion resistant, galvanized finish. | |
DIMENSIONS
| SUPPORT SIZE | PIPE O.D. | STRAP SIZE | THREAD STUD | BASE PLATE | EXTENSION PIPE REQ’D | MINIMUM DIST. TO FLOOR |
|---|---|---|---|---|---|---|
| 2″ | 2.5″ | 3/8″ x 2″ | 1″ x 6″ | 4″x6″x¼” | 2″ SCH. 40 | 7″ |
| 2½” | 3″ | 3/8″ x 2″ | 1″ x 6″ | 4″x6″x¼” | 2″ SCH. 40 | 7″ |
| 3″ | 3.96″ | 3/8″ x 2″ | 1″ x 6″ | 4″x6″x¼” | 2″ SCH. 40 | 7″ |
| 4″ | 4.80″ | ½” x 2″ | 1″ x 6″ | 8″x8″x¼” | 2″ SCH. 40 | 7″ |
| 6″ | 6.90″ | ½” x 2″ | 1″ x 6″ | 8″x8″x¼” | 2″ SCH. 40 | 7″ |
| 8″ | 9.05″ | ½” x 2″ | 1″ x 6″ | 8″x8″x¼” | 2″ SCH. 40 | 7″ |
| 10″ | 11.10″ | ½” x 2″ | 1″ x 6″ | 8″x8″x¼” | 2″ SCH. 40 | 7″ |
| 12″ | 13.20″ | ½” x 2″ | 1″ x 6″ | 8″x8″x¼” | 2″ SCH. 40 | 7″ |
| 14″ | 15.30″ | 5/8″ x 3″ | 1½” x 6″ | 8″x8″x½” | 3″ SCH. 40 | 9½” |
| 16″ | 17.40″ | 5/8″ x 3″ | 1½” x 6″ | 8″x8″x½” | 3″ SCH. 40 | 9½” |
| 18″ | 19.50″ | ¾” x 4″ | 2″ x 6″ | 8″x8″x½” | 4″ SCH. 40 | 10″ |
| 20″ | 21.60″ | ¾” x 4″ | 2″ x 6″ | 8″x8″x½” | 4″ SCH. 40 | 10″ |
| 24″ | 25.80″ | ¾” x 4″ | 2″ x 6″ | 8″x8″x½” | 4″ SCH. 40 | 10″ |
| 30″ | 32.00″ | 1″ x 5″ | 3″ x 6″ | 15″x15″x½” | 6″ DIP | 10″ |
| 36″ | 38.30″ | 1″ x 5″ | 3″ x 6″ | 15″x15″x½” | 6″ DIP | 10″ |
Standon Model S96 Flange Cradle Pipe Support
The “Standon” model #S96 Flange Cradle Pipe Support was designed for use not only in new installations, but also as an economical replacement on existing facilities. The innovative saddle design is radiused to fit snugly under your assembled flange configurations. Centering tabs maintain position during seismic activity, and are spaced to avoid bolt position conflict.
The Standon Flange Cradle Support comes with an oversized base and an adjustable collar allowing up to 4″ of fine adjustment.
- Accepts standard IPS pipe – No threading required.
- Comes complete with over-sized anchorable base plate.
- Available in sizes 2″ through 24″.
- Manufactured to fit CL 125 Flanges.
- Also available in 100% 304 Stainless Steel.
| MATERIAL | |
|---|---|
| Flange Cradle: | ASTM A36 |
| Collar/ Base Cups: | ASTM A53 D.O.M. tubing |
| Threaded Stud: | ASTM A36; rolled thread Grade ASTM A307 |
| Base Plate: | ASTM A36 Sheet Steel – .25″ plate |
| Optional Material: | 100% 304 Stainless Steel |
| FABRICATION | |
| All welds: | 100% MIG welding, electrode E70XX |
| Cradle: | Formed to ductile iron radius. |
| FINISH | |
| All pipe supports have a corrosion resistant, galvanized finish. | |
DIMENSIONS
| FLANGE CL 125 | CRADLE MATERIAL | THREAD STUD | BASE PLATE | EXTENSION PIPE REQ’D | MINIMUM DIST. TO FLOOR |
|---|---|---|---|---|---|
| 2″ | 3/8″ x 1½” | 1″ x 6″ | 4″x6″x¼” | 2″ SCH. 40 | 7″ |
| 2½” | 3/8″ x 1½” | 1″ x 6″ | 4″x6″x¼” | 2″ SCH. 40 | 7″ |
| 3″ | 3/8″ x 1½” | 1″ x 6″ | 4″x6″x¼” | 2″ SCH. 40 | 7″ |
| 4″ | ½” x 2″ | 1″ x 6″ | 8″x8″x¼” | 2″ SCH. 40 | 7″ |
| 6″ | ½” x 2″ | 1″ x 6″ | 8″x8″x¼” | 2″ SCH. 40 | 7″ |
| 8″ | ½” x 2½” | 1″ x 6″ | 8″x8″x¼” | 2″ SCH. 40 | 7″ |
| 10″ | ½” x 2½” | 1″ x 6″ | 8″x8″x¼” | 2″ SCH. 40 | 7″ |
| 12″ | ½” x 2½” | 1″ x 6″ | 8″x8″x¼” | 2″ SCH. 40 | 7″ |
| 14″ | 5/8″ x 3″ | 1½” x 6″ | 8″x8″x½” | 3″ SCH. 40 | 9½” |
| 16″ | 5/8″ x 3″ | 1½” x 6″ | 8″x8″x½” | 3″ SCH. 40 | 9½” |
| 18″ | ¾” x 3½” | 2″ x 6″ | 8″x8″x½” | 4″ SCH. 40 | 10″ |
| 20″ | ¾” x 3½” | 2″ x 6″ | 8″x8″x½” | 4″ SCH. 40 | 10″ |
| 24″ | ¾” x 4″ | 2″ x 6″ | 8″x8″x½” | 4″ SCH. 40 | 10″ |
Standon Model TP Thrust Retention Plate
| The Standon model TP is for the retention of plain end and flexible joint assemblies. Ideal for use on expansion joints or any flanged system that needs restrained. |   |
| MATERIAL | ASTM A36 Mild Steel |
|---|---|
| Optional Material: | 100% 304 Stainless Steel |
| FABRICATION | Laser burnout or flame cut depending on material and thickness |
| FINISH | Standard: BlackOptional:Galvanized or red oxide primer |
DIMENSIONS
| SIZE | PLATE THICKNESS | RECOMMENDED PLATES PER FLANGE | RECOMMENDED CONTROL ROD DIAMETER |
|---|---|---|---|
| 2″ | ½” | 2 per side | 5/8″ |
| 2½” | ½” | 2 per side | 5/8″ |
| 3″ | ½” | 2 per side | 5/8″ |
| 4″ | ½” | 2 per side | 5/8″ |
| 6″ | ½” | 2 per side | ¾” |
| 8″ | ½” | 2 per side | ¾” |
| 10″ | ¾” | 3 per side | 7/8″ |
| 12″ | ¾” | 3 per side | 7/8″ |
| 14″ | ¾” | 3 per side | 1″ |
| 16″ | ¾” | 4 per side | 1″ |
| 18″ | ¾” | 4 per side | 1″ |
| 20″ | 1″ | 4 per side | 1 1/8″ |
| 24″ | 1″ | 4 per side | 1 1/8″ |